Configuration de base

Mettre en mot de passe (valable pour ssh et le GUI Luci:

root ~ # passwd
Changing password for root
New password:root
Bad password: too short
Retype password:root
Password for root changed by root
root ~ #

Configuration pour borne WIFI Mesh

Toutes les interfaces devraient être bridgé ensemble

root ~ # brctl show
bridge name     bridge id               STP enabled     interfaces
br-lan          7fff.b827eb3a5c75       no              eth0
                                                        eth1
                                                        wlan0-1
                                                        wlan0

Example de Config IP

(A configurer depui le GUI Luci: http:192.168.0.2)

pour l'interface LAN (br-lan)

IP: 192.168.0.2
Mask: 255.255.255.0
GW: 192.168.0.1
DNS forwardings = 8.8.8.8